Revmaster 2100 D engine. This is a used engine, which came will all the assesories. I
contacted Revmaster and found out that the last known owner had purchased enough parts
to complete a top overhaul. Tear down inspection found that the pistons were new, heads
are servicable, but the magneto was toast. I ended up sending the Bendix dual magneto in
for a complete overhaul, cost $1000, ouch.
contacted Revmaster and found out that the last known owner had purchased enough parts
to complete a top overhaul. Tear down inspection found that the pistons were new, heads
are servicable, but the magneto was toast. I ended up sending the Bendix dual magneto in
for a complete overhaul, cost $1000, ouch.
Engine mount installed with trigear
nose wheel, gascolator and battery
box.
nose wheel, gascolator and battery
box.
Engine installed. I
replaced the odd
looking oil cooler line
with a real aviation
hydraulic line from
Revmaster. I ended
up doing some
serious cowling work
on the bottom where
the carb intake is
located to give
enough room for the
oil cooler and
Revflow carb.
replaced the odd
looking oil cooler line
with a real aviation
hydraulic line from
Revmaster. I ended
up doing some
serious cowling work
on the bottom where
the carb intake is
located to give
enough room for the
oil cooler and
Revflow carb.
